STEP 7
1. Attach drawer slides (V) to right side panel (2) by inserting 2 wood screws (L) through
holes on drawer slides (V), then tighten to right side panel (2).
2. Attach 2 hinges (E) to right support board (3) by inserting 4 wood screws (D) through holes
on hinges (E), then tighten to right support board (3).
STEP 8
1. Screw 6 cam bolts (B) into cam bolt holes on left side panel (1) and right side panel (2).
2. Insert 6 wood dowels (A) into dowel holes on left side panel (1) and right side panel (2).
3. Attach cross bar (4) to left side panel (1) by inserting wood dowel (A) and cam bolt (B) into
holes on cross bar (4), then insert 1 cam lock (C) into cam lock hole on cross bar (4), then
rotate clockwise to secure cam bolt (B) in place.
4. Attach bottom board (5) to left side panel (1) by inserting wood dowels (A) and cam bolts
(B) into holes on bottom board (5), then insert 2 cam locks (C) into cam lock holes on
bottom board (5) and rotate clockwise to secure cam bolts (B) in place.
5. Repeat above steps to attach right side panel (2) to cross bar (4) and bottom board (5).
6. Attach magnet (H) to cross bar (4) by inserting 2 wood screws (H) through holes on
magnet (H), then tighten to cross bar (4).
