STEP 9
STEP 10
1. Attach pre-assembled shelves and rail boards to upper left side frame (13) by inserting
2 machine screws (C) through holes on each left rail board (1, 3, 5) and tighten to upper left
side frame (13).
2. Attach bottom rear cross bar (11) to bottom left side frame (15) by inserting 2 screws (B)
through holes on bottom left side frame (15) and tighten to bottom rear cross bar (11).
Option #1: Securing to Drywall
1. Position spacesaver against wall in desired location. Using a pencil, make small mark on wall through
hole on bracket (H). Move spacesaver away from wall and screw 1 plastic anchor (G) into wall on
pencil mark.
2. Place spacesaver against wall, insert 1 screw (E) through hole on bracket (H), then tighten to plastic
anchor (G).
Option #2: Securing to Drywall and Wood Stud
1. Position spacesaver against wall in desired location. Insert 1 screw (E) through hole on bracket (H),
then tighten through drywall and into wood stud.
*Tip: Anchor bracket (H) can be adjusted to correct distance from wall to cabinet as needed. Once adjusted,
be sure to re-tighten bracket inside cabinet for stability.
11