STEP1
STEP1:
1. Attach 6 cross bars (1) to the right side panel (3).
2. Insert 6 screws (B) into the holes on the right side panel (3) then tighten into the holes of the 6 cross bars (1) by
using an Allen wrench
.
STEP2
STEP2:
1. Insert the other 3 bars(1) into pre-drilled holes on the right side panel(3).no screws needed.
2. Attach middle panel (4) to the pre-assembly cross bar (1) .
3. Insert the other 3 cross bars (1) into the pre-drilled holes on the middle panel (4)
4. Insert 6 screws (B) into the holes on the middle panel (4) then tighten into the holes of the 6 cross bars (1) by
using an Allen wrench.