STEP 6
1.
Insert 8 wood dowels (C) into wood dowel holes on upper left side panel (11).
2.
Attach upper left side panel (11) to upper rear board (1), upper shelf (2), middle rear board (3) and
lower rear board (5) by inserting wood dowels (C) into wood dowel holes and insert cam bolts (A)
into cam lock holes on upper rear board (1), upper shelf (2), middle rear board (3) and lower rear
board (5).
3.
Insert 3 cam locks (B) into cam lock holes on upper shelf (2), middle rear board (3) and lower rear
board (5), then rotate clockwise to secure cam bolts (A) in place.
STEP 7
1.
Attach 2 upper back boards (16) to pre-assembled unit by inserting 24 screws (K) through holes on 2
upper back boards (16), then tighten to back of unit.
