STEP 1
1. Place top board (1) upside down on soft padded surface.
2. Attach back cross bar (7) to top board (1) by inserting 3 screws (C) through holes on back
cross bar (7) and tighten to top board (1).
3. Repeat above step to attach front cross bar (8) to top board (1).
STEP 2
1. Attach 1 side frame (2) to top board (1) by inserting 2 screws (B) through holes on side
frame (2)
,
then tighten to back cross bar (7) and front cross bar (8) using Allen wrench (I).
When tightening, slightly push screw in to catch inner thread.
