Riverlea Duratuf SS2010, Руководство по сборке

Страница: 7 / 15

ASSEMBLE DOOR
6
SELECT:
2 x 1.810 m Door Sheets (Narrow)
2 x 0.945 m Door Top/Bottom Flashings
2 x 1.810 m Door Side Flashings
3 x Hinges
1 x Padbolt Support Flashing
2 x 1.160 m Door Brace Flashings
54 x Rivets
STEP 1:

Lay out door sheets on a flat surface
making sure narrow pans are on the
outside.

Rivet sheets together in the centre en-
suring ends are flush with each other.
STEP 2:

Position door side flashings and top
and bottom flashings and assemble
door as shown.

Drill and rivet as per diagram.
STEP 4:

On the back of the door, place door braces in posi-
tion as shown in fig.3.

Ensure that the top and bottom ends of the braces
are under the door flashings as shown in fig.4. and
opposite ends of the braces overlap in the middle.

Rivet door brace flashings onto back of door as
shown. Where possible, rivet from front of door
.
fig.1
STEP 3:

Attach hinges to door side flashing using rivets provided.
Ensure hinge is flush with back of door, and 60mm in from
each end as per fig.2.

Using one rivet, attach padbolt support as shown in fig. 1.
NARROW PANS
fig.3
fig.4
fig.2