SteelFusion Edge Installation and Configuration Guide
31
Configuring SteelFusion Edge Appliances
Installing and Configuring the SteelFusion Edge Appliance
7.
The system confirms your settings.
You have entered the following information:
1. Hostname: amnesiac
2. Use DHCP on primary interface: no
3. Primary IP address: 10.10.10.6
4. Netmask: 255.255.0.0
5. Default gateway: 10.0.0.1
6. Primary DNS server: 10.0.0.2
7. Domain name: example.com
8. Admin password: xxxyyy
9. SMTP server: natoma
10. Notification email address: [email protected]
11. Set the primary interface speed: auto
Step 11: Set the primary interface
speed?
Enter the speed on the primary
interface (that is, the Edge appliance).
Make sure that this value matches the
setting on your router or switch.
The default value is auto.
Set the primary interface speed?
[auto] auto
Step 12: Set the primary interface
duplex?
Enter the duplex mode on the primary
interface. Make sure that this value
matches the setting on your router or
switch. The default value is auto.
Set the primary interface
duplex? [auto] auto
Step 13: Would you like to
activate the in-path
configuration?
Enter
yes
at the system prompt to
configure in-path support. An in-path
configuration is a configuration in
which the Edge appliance is in the
direct path of the client and server.
Would you like to activate the
in-path configuration? yes
Step 14: In-Path IP address?
Enter the in-path IP address for the
Edge appliance.
In-Path IP address? 10.11.11.6
Step 15: In-Path Netmask?
Enter the in-path netmask address.
In-Path Netmask? 255.255.0.0
Step 16: In-Path Default
gateway?
Enter the in-path default gateway (the
WAN gateway).
In-Path Default Gateway?
10.11.11.16
Step 17: Set the in-path: LAN
interface speed?
Enter the in-path, LAN interface
speed. Make sure that this value
matches the setting on your router or
switch.
The default value is auto.
Set the in-path: LAN interface
speed? [auto] auto
Step 18: Set the in-path: LAN
interface duplex?
Enter the in-path, LAN duplex value.
Make sure that this value matches the
setting on your router or switch.
The default value is auto.
Set the in-path: LAN interface
duplex? [auto] auto
Step 19: Set the in-path: WAN
interface speed?
Enter the in-path, WAN interface
speed. Make sure that this value
matches the setting on your router or
switch.
The default value is auto.
Set the in-path: WAN interface
speed? [auto] auto
Step 20: Set the in-path: WAN
interface duplex?
Enter the in-path, WAN duplex speed.
Make sure that this value matches the
setting on your router or switch.
The default value is auto.
Set the in-path: WAN interface
duplex? [auto] auto
Wizard Prompt
Description
Example
