94 | Installing NICs in SteelHead xx50 Appliances
NICs for SteelHead xx50 appliances
Software compatibility
This section describes the software requirements for NICs:
•
SteelHead xx50 appliance require RiOS 5.0.3 or later to recognize add-on NICs in conjunction with
the appliance’s onboard ports. Upgrade to 5.0.3 or later and enter the
in-path reset-iface
command
to recognize all ports.
•
The Two-Port LR Single Mode Fiber 10-Gigabit Ethernet PCIe card requires RiOS 5.5.8 or 6.0.2 or
later.
•
To run the Two-Port LR Single Mode Fiber 10-Gigabit Ethernet PCIe card on an Interceptor 9350
appliance requires Interceptor 2.0.4 or later.
•
The Two-Port SR Multimode Fiber 10-Gigabit Ethernet PCIe card requires RiOS 5.5.7 or 6.0.2 or
later.
•
Interceptor 2.0.2a or 1.2.0a or later is required to run the Two-Port SR Multimode Fiber 10-Gigabit
Ethernet PCIe card on Interceptor 9350 appliances. Interceptor 2.0.3 is required to run four (4)
Two-Port SR Multimode Fiber 10-Gigabit Ethernet PCIe cards.
•
It isn’t necessary to plug in the 12-volt connector of the Two-Port SR Multimode Fiber 10-Gigabit
Ethernet PCIe card.
•
The LX Fiber PCIe NICs require RiOS 4.1.9, 5.0.7, or 5.5.2 or later.
•
The Two-Port FX Multimode Fiber 100-Mbps PCIe card requires RiOS 5.5.9 or 6.0.4 or later.
•
SteelHead xx50 appliances are only compatible with PCIe NICs.
Supported cards
The following table summarizes the NICs compatible with SteelHead xx50 appliances.
NICs for SteelHead xx50
Manufacturing part #
Orderable part #
Two-Port SX Multimode Fiber Gigabit Ethernet PCIe card
410-00101-01
NIC-01G-2SX
Four-Port SX Multimode Fiber Gigabit Ethernet PCIe card
410-00102-01
NIC-01G-4SX
Four-Port TX Copper Gigabit Ethernet PCIe card
410-00103-01
NIC-01G-4TX
Two-Port LX Single Mode Fiber Gigabit Ethernet PCIe card
410-00105-01
NIC-01G-2LX
Four-Port LX Single Mode Fiber Gigabit Ethernet PCIe card
410-00106-01
NIC-01G-4LX
Two-Port FX Multimode Fiber 100-Mbps PCIe card
410-00107-01
NIC-01M-2FX
Two-Port LR Single Mode Fiber 10-Gigabit Ethernet PCIe card
410-00301-01
NIC-10G-2LR
Two-Port SR Multimode Fiber 10-Gigabit Ethernet PCIe card
410-00302-01
NIC-10G-2SR
Содержание NIC LR
Страница 8: ...8 Contents ...
Страница 16: ...16 Getting Started Troubleshooting ...
Страница 48: ...48 Installing Network Cards in xx80 Appliances Identifying interface names ...
Страница 106: ...106 Installing NICs in SteelHead xx50 Appliances Installing NICs in 3U xx50 appliances and Interceptor 9350 ...