Network Card Status Lights for SteelHead and SteelCentral xx80 Appliances
| 121
A
Network Card Status Lights for SteelHead
and SteelCentral xx80 Appliances
This appendix summarizes the network add-on cards status lights for the SteelHead and SteelCentral
xx80 appliances. It includes these sections:
•
“Four-Port 1-GbE Copper Bypass card” on page 122
•
“Four-Port 1-GbE Fiber SX card” on page 123
•
“Four-Port 1-GbE Fiber LX card” on page 124
•
“Four-Port 10-GbE Fiber SR card” on page 125
•
“Four-Port 10-GbE Fiber LR card” on page 126
•
“Two-Port 40-GbE Fiber SR4 card” on page 127
•
“Two-Port 40-GbE Fiber LR4 card” on page 127
•
“Four-Port 1-GbE Fiber/Copper SFP card” on page 128
•
“Two-Port 10-GbE Fiber SFP+ card” on page 129
•
“Four-Port 10-GbE Fiber SFP+ card” on page 130
•
“Two-Port 40-GbE Time Stamp card” on page 131
•
“Two-Port 4/8/16-GbE FC HBA (SAN)” on page 132
•
“Two-Port 100-GbE QSPF+ Time Stamp Card” on page 133
•
“Four-Port 10-GbE DAC Redirector Card” on page 134
This appendix assumes you have installed and configured the appliance. For details, see the installation
and configuration guide for your product.
Note:
The physical ports on the NICs are mapped in proximity to the PCI bus edge connector. The port closest to
the edge connector is L0, followed by W0, L1, and W1.
Содержание NIC LR
Страница 8: ...8 Contents ...
Страница 16: ...16 Getting Started Troubleshooting ...
Страница 48: ...48 Installing Network Cards in xx80 Appliances Identifying interface names ...
Страница 106: ...106 Installing NICs in SteelHead xx50 Appliances Installing NICs in 3U xx50 appliances and Interceptor 9350 ...