Plug in!
Now plug the amp into the wall, plug your guitar into either input jack, and set your
controls to one of the Quick Start settings outlined here. Then turn on the Power switch.
Wait for about a minute for the tubes to warm up. Turn on the Standby switch. Now it's
time to rock.
After you've played with your Venus 5 for a while, check out the rest of the manual for
some good tips on getting the most out of your amp.
Quick Start Settings
If you're looking for a good starting point, try these settings. Remember that every guitar
and speaker cabinet sounds different, so try both inputs, and adjust the Focus and Presence
to suit your taste.
Channel 1
Low gain blues
Medium Gain Blues
-(Master not pulled)
Crunch
