-2-
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions before using.
2. To protect against the risk of electrical shock do not immerse power unit in water or
other liquid.
3. Close supervision is necessary when mixer is used by or near children.
4. Unplug from outlet when not in use, before putting on of taking off parts and
before cleaning.
5. Avoid contact with moving parts. Keep hands, hair, clothing as well as spatulas and
other utensils away from beaters during operation to prevent injury and/or damage
to the mixer.
6. Remove beaters from mixer before washing.
7. Do not operate appliance with a damaged cord or plug or after appliance
malfunctions, or is dropped or damaged in any manner. Call Rival
®
Customer
Service (see warranty) to return for examination, repair, or electrical or mechanical
adjustment.
8. The use of attachments not recommended or sold by Rival
®
may cause fire,
electrical shock or injury.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter.
11. Do not let cord contact hot surface, including stove.
This appliance is for HOUSEHOLD USE ONLY. No user-serviceable parts inside. Do not attempt to
service product. Power unit never needs lubrication.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). As a safety
feature, this plug will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
ASSEMBLING YOUR HAND MIXER
TO INSERT BEATERS
CAUTION: Be sure mixer is unplugged.
When mixer is resting on its HEEL and holding the HANDLE of the MIXER BODY, insert the
BEATER with the RED GEAR WHEEL into the slot with the RED RECESS. Push firmly until it locks
into position. Then insert the BEATER with the BLUE GEAR WHEEL into the slot with the BLUE
RECESS and push firmly into position. Repeat with the last BEATER in the remaining slot.
