RTS Series
RTS650 Installation Guide
04-2017-A
www.rivatech.de
13
④
LAN connection
This is a RJ45 LAN connector for 10/100 Base-T Ethernet. Use the Ethernet cable (RJ45) to
connect the device to a hub or a router in the network. Refer to “
Appendix (B). Power over
Ethernet
” for more information.
⑤
Power Connection
The camera can be powered by either 12VDC or PoE. If the camera is powered via PoE, you do
not need to connect the power adaptor. For more information about PoE, refer to “
Appendix
(B). Power over Ethernet
”
for more information.
Note
i
[ Operation of the internal heater ]
- Temperature criterion for the heater operation: 0˚C (32˚F)
- Lowest temperature to guarantee the heater operation during the device
operation: -40˚C (-40˚F)
- Lowest temperature to boot up the device when the device is powered on:
- 0˚C (32˚F)
