Riva RC6802HD-6217, Руководство по установке, Страница: 7 / 22

www.blick-store.de
Caution
!
4. INSTALLATION
1)
Place the installation template
(paper) that is included in the
package on the desired installation
surface.
2)
Drill three holes in correct
positions based on the template
paper, and insert anchor blocks
into the holes.
3)
Place the camera body and
match three alignment holes with
three anchor blocks and hold
against the mounting surface.
4)
Tighten the anchor blocks with
screws.
5)
Connect required cables to the
device including a power cable and
a LAN cable. Please refer to the
“
3. PART NAMES ” for more detail.
6)
Adjust the heading direction of
the camera. Please refer to the
“
4.2. Adjust the angle of the
camera ” for more detail.
To prevent products from damaging, place the camera on stable
and non-vibrating surfaces If the stability is in doubt, consult with
safety personnel for reinforcements, and then proceed with the
installation.