6
3. PART NAMES
1.
Reset button
The reset button can be used for restarting the device or resetting back to Factory
Default. Refer to
6.3. Reset
and
6.4. Factory Default
for more details. Reset button is
located under PCB.
2.
PAL /NTSC output configuration button
The first button (SW1) sets the visual standard output system. Pressing this button
converts the video output standard to NTSC, PAL, or Off. Please note that the
analog video signal is only 3 minutes present and go back automatically to none video
output mode (only installation process).
3.
Video output, audio and IO terminal connector
A 9-pin terminal block is included in the device package. Connect this terminal block
into this connector for cable connection of video output, audio input/output, and digital
* Models herein and their appearance are
subject to change without any prior notice.
