Riva C6702HD-6211, Быстрое руководство по установке

Страница: 3 / 11

NC320209-2013-A
3
3. Set the lens position
1) Remove the dome cover with the opener included in the package.
2) Adjust the lens to the desired position by manually moving its upper lens shell, reinforced
body or horizontal platform in the following directions.
3) Connect to the web page of the device to see its real-time image. Refer to 5. View video on
web page for details about using its web page.
6) Once the lens position is well-adjusted, reverse all the steps in order to reassemble the
device.
** The lens focus is pre-adjusted, best at 3m distance, when the camera is delivered
out of factory. It is recommended not to adjust the lens focus unless it has to be.
More Information
Set Ring
Lens
B. To pan, rotate the lower
body of the camera gimbal.
C. To tilt, tilt the lens by
vertically adjusting the camera.
A. To adjust lens position,
rotate the camera gmbal.
Opener
4) Rotate the set ring counterclockwise will
allow users to adjust the focal length of the
lens.
5) Adjust the focal length of the lens by
rotating the lens. After the setting, tighten
up the set ring by turning it clockwise.