6
Feedback knob
Set the initial amount of distorted signal
feeding back into the distortion circuit
Gain knob
Set the initial amount of gain applied to
the input signal
Blend knob
Fully counter clockwise is the dry signal
Fully clockwise is 100% wet
Level trimmer
Set the output volume - it doesn’t affect
the overall distortion effect
Audio input
100k impedance - the input signal voltage
greatly influences the effect
Audio output
1k impedance
Gain attenuverter
Set the amount of CV applied to the gain
parameter. CW adds up to the gain knob
position, CCW substracts
Feedback attenuverter
Set the amount of CV applied to
the feedback parameter.
Gain CV input
CV input (-5/+5V)
Feedback CV input
CV input (-5/+5V)
Feedback loop input
Feedback input is normalized to the
feedback output jack. A jack breaks
the loop
Feedback loop output
Outputs the feedback signal - nothing
is present if there is no feedback
Miasma controls
Ritual Electronics
Feedback
Blend
_
Gain
Fdbk CV
Level
Gain CV
In
+
_
+
Fdbk In
Fdbk Out
Miasma
