Rittal R8 E Скачать руководство пользователя

Страница: 22 / 29

7 Maintaining the machine

We reserve the right to make technical modifications.

Rittal electrical crimping machine R8 E

7.5

Replacing the insulation stripping blade

Warning!
Electrical shock caused by working on live components!

◼

Before working on the machine, it must be disconnected from
the power grid.

Caution!
There is risk of finger injuries at the insulation stripping blades.

◼

Never touch the blade.

◼

Set insulation stripping stage 99.

◼

Switch off the machine.

◼

Open the flap and remove the belt.

◼

Close the flap.

◼

Press the display and switch on the machine.
The machine travels to the blade replacement position, see display.

◼

Switch off the machine.

◼

Open the flap.

◼

Remove the screws (see fig. 19, item 1).

◼

Replace the insulation stripping blade (see fig. 19, item 2).

◼

Insert the insulation stripping blade in the blade holder until the limit stop.

◼

Close the flap.

◼

Switch on the machine, see display.

◼

Press the display for 3 seconds.
The machine travels automatically to the initial position.

◼

Select the insulation stripping stage.

◼

Switch off the machine.

◼

Insert the wire end ferrule belt.

Fig. 19:

Replacing the insulation stripping blade

7.6

Replacing ferrule separating blade

Caution!
There is risk of finger injuries at the ferrule separating blade.

◼

Never touch the blade.

◼

Switch off the machine.

◼

Open the flap.

Содержание R8 E






























Результаты поиска

Содержание R8 E

Отзывы:

Похожие инструкции для R8 E

Бренды по названию

Популярные бренды

Rittal R8 E, Руководство по эксплуатации

Результаты поиска

Содержание R8 E

Отзывы:

Похожие инструкции для R8 E

Бренды по названию

Популярные бренды