Rittal R8 E, Руководство по эксплуатации

Страница: 16 / 29

6 Menu
16 We reserve the right to make technical modifications. Rittal electrical crimping machine R8 E
EN
Incorrect
Protected
conductor
Removed
conductor
Crushed
conductor
Recessed
conductor
Tab. 2: Wire entry
6 Menu
6.1 Jogging operation
Jogging operation display
"Initial position"
Jogging operation display
"Not in initial position"
Fig. 11: Jogging operation
– Machine at initial position / switched on.
– One of the insulation stripping stages 1 to 15 must be set.
◼ Switch off the machine.
◼ Open the flap.
◼ Remove the belt.
◼ Close the flap.
◼ Keep the display pressed.
◼ Switch on the machine (machine in jogging operation).
The display switches to the "Jogging operation initial position" display.
◼ Traverse backwards (see fig. 11, item 1) or forwards (see fig. 11, item 2) in jog-
ging operation using the arrow keys.
◼ Traverse the machine manually until the initial position (see fig. 11, item 3) is
reached again.
◼ Alternatively: Press the hand symbol for 3 seconds.
This causes the machine to travel automatically to the initial position.
◼
Switch off the machine.
◼ Insert the belt roll.
◼ Switch on the machine.
3
1
2