11
•
Prior to working on the RITTAL CMC-TC this must be made voltage-free and secured
against reclosing.
Furthermore, the absence of electrical power must be checked.
•
Cable clamping and protection is made by means of commercial cable ties at the casing
or enclosure used.
See Appendix
E 1 Electrical connection: CMC-TC master
5. Start-up
Note:
The RITTAL CMC-TC is an independent system without mains switch and
automatically loads the firmware (operating system) into the main memory when the mains
voltage is connected.
Please follow the steps set out in Appendix
F 1 Check list Commencing operation
.
See Appendix
F 1 Check list Commencing operation of CMC-TC Master
See Appendix
E 2 Configuration of serial interface RS 232
6. Operation
The RITTAL CMC-TC can be operated by means of the following devices:
Terminal program by serial connection
, e.g. Hyperterminal, this operating mode
necessitates a direct connection between the PC operator workstation and the CMC-TC
Master Intended use: First startup.
Terminal program by network connection,
e.g. TELNET (Tera Term), restricted to the
required network configuration setups.
Standard browser
, affords via a simple graphic surface the more comprehensive
administration of the RITTAL CMC-TC Master using service-proven, widely used standard
software (browser). Recommended for the administrator and the user.
Professional management software
, as e.g. HP OpenView and others, see operating
instructions for the corresponding management software.
See
Appendix G 1 Display and operating elements enclosure
See
Appendix H 1 Display and operation by terminal program
See
Appendix I 1 Operation of CMC-TC Master by browser
See
Appendix J 1 Software functions
