Rittal CMC III Processing Unit / CMC III Processing Unit Compact
11
EN
6
Network settings
Connect the device with a network cable using the Ethernet interface to your computer (fig. 3,
item 11).
Change the IP address of your computer to any address in the range 192.168.0.xxx, e.g.
192.168.0.191
. The default address 192.168.0.190 of the device may not be used.
Set the subnet mask to the value
255.255.255.0
.
If necessary, switch off the proxy server in the browser in order to permit a direct connection to
the device.
Enter the
http://192.168.0.190
address in the browser (fig. 4, item 1). The login dialogue to log
in to the device will be displayed.
Login as
admin
user with password
admin
(fig. 4, item 2).
Click the
Processing Unit
entry (fig. 4, item 3) in the left-hand subarea of the overview window
(configuration area) and the
Configuration
tab (fig. 4, item 4) in the right-hand subarea (naviga-
tion area).
Click the
TCP/IP
button in the
Network
group frame (fig. 4, item 5).
Change the IP address of the device in the
TCP/IP Configuration
window in the
IPv4 Configu-
ration
group frame to an address permitted in the network (fig. 4, item 6).
If necessary, correct the settings for the net mask and the gateway.
Alternatively, select the "DHCPv4" setting instead of "Manual" for an automatic IP allocation.
Click the
Save
button to save the settings.
Change the network settings of your computer to their original values of the IP address and the
subnet mask.
Disconnect the network cable to your computer.
Connect the CMC III PU with a network cable with your Ethernet LAN (fig. 3, item 11).
To determine whether any software updates are required: see www.rittal.com or contact Rittal Serv-
ice (see section 7).
7
Service
For technical questions, please contact:
Tel.: +49(0)2772 505-9052
E-mail: [email protected]
Homepage: www.rittal.com
For complaints or service requests, please contact:
Tel.: +49(0)2772 505-1855
E-mail: [email protected]
Note:
You may need to use a cross-over cable for this purpose.
Note:
The settings for the IPv4 protocol are described below in detail. For further information
on TCP/IP configuration, please see section 1.1.
Network settings, Service
Содержание CMC III Processing Unit
Страница 17: ......
