Rittal AS 4050.451, Руководство по эксплуатации

Страница: 14 / 21

6 Troubleshooting
14 We reserve the right to make technical modifications. Rittal S22 insulation stripping machine
EN
Fig. 8: Wire-holding pliers
5.3 Replacing the insulation stripping blade
Warning!
Electrical shock caused by working on live components!
◼ Before working on the machine, it must be disconnected from
the power grid.
◼ Loosen the screws and remove the front panel.
◼ Loosen the fastening screws and remove the blade fastener.
◼ Either turn the insulation stripping blade or replace it with a new one. Reinsert
the blade fastener and tighten the fastening screws.
Fig. 9: Interior view
Key
1
Actuator lever with ball-pressure screws
2 Fastening screw
3 Insulation stripping blade
4 Blade fastener
◼ Close the front panel. To do this:
– Push the actuator level to the left.
– Place the front panel and, by moving from right to left, fasten it to the front
frame of the machine (attach with the alignment pin on the right-hand side).
– Fasten the front panel with the screws.
6 Troubleshooting
6.1 Machine does not start
The power supply is interrupted.
◼ Check the mains cable and the fuses.
1
4 4
2 2 3 3