3 How to Install Wireless Touch Receiver
(DAW-3)
4 External Dimensions
(Characters expressed in the country’s Language)
AC220
①
①
DC12V~30V
AC12V~30V
⑤
Transmitter Input Button
②
Power On LED
③
Operation LED
☞
Descriptions of Designations
①
Select one of AC220V or AC, DC 12V~30V for power supply and input power.
②
Power On LED: Make sure that red light is on in the Power On LED.
③
Operation LED: When the wireless touch switch is operating, green light blinks.
④
Output Contact: Output contact terminal.
⑤
Transmitter Input Button: While pressing and holding this switch, press and hold the Transmitter Switch for about 6 seconds.
⑥
Transmitter Delete Button: While pressing and holding this switch, press and hold the Transmitter Switch for approx. 1
second.
⑦
Jumper Terminal: When connecting the two terminals and pressing down the wireless touch switch, relay contact duration is
kept for 8 seconds.(If the terminals are disconnected, contact is made only when pressing and holding the switch) .
☞
To delete all the transmitters input in the wireless receiver :
Press and hold
⑤
and
⑥
at the same time for 1 second (10 seconds required to delete them.)
⑦
Jumper Terminal
☞
Internal Designations
☞
External Designations
⑥
Delete Button
④
Output Contact
DAW-3(Receiver)
DAW-5(Transmitter)
40
PUSH
自動
눌러
주
세
요
AUTO
161
185
41
13
51
30
RITS-N CO., LTD.
