qtm9322b.pm5
For assistance, call RITRON at 800-USA-1-USA (800-872-1872) or visit us at www.ritron.com
8
C. TO PROGRAM THE ASSISTANCE NEEDED MESSAGE:
1. Pick up the telephone receiver and listen for the
acknowledge tone.
2. Dial
312
.
Quick Assist II
responds with three short
tones to prompt you to begin speaking, then records
the message. This message is to be no longer than 8
seconds.
Remember: speak loudly and clearly.
EXAMPLE
:
Customer needs assistance in Aisle 9.
3. When you have finished speaking, press and release
the telephone flash-hook.
4. You may either continue programming additional
features, or you may dial
999
and hang up the
telephone to stop programming.
NOTE:
To review your recorded message,
dial "
412
".
D. TO PROGRAM TIME BETWEEN REPEATED MESSAGES:
(DEFAULT SETTING IS 30 SECONDS)
1. Look up the code for the desired time between
messages on Table 4, below.
2. Pick up the telephone receiver and listen for the
acknowledge tone.
3. Dial
512
, then the code digit from Table 4.
EXAMPLE
:
If you select 2 minutes as the time between
messages, dial
5124
.
4.
Quick Assist II
responds with a single beep to indicate
it has programmed the time between messages.
5. You may either continue programming additional
features, or you may dial
999
and hang up the
telephone to stop programming.
E. TO PROGRAM A "UNIQUE" LOW BATTERY MESSAGE:
1. Pick up the telephone receiver and listen for the
acknowledge tone.
2. Dial "
35
".
Quick Assist II
responds with three short
tones to prompt you to begin speaking, then records
the message. This message is to be no longer than
1.5 seconds.
EXAMPLE
:
"Low battery Aisle 9"
3. When you have finished speaking, press and release
the telephone flash-hook.
4. You may either continue programming additional
features, or you may dial
999
and hang up the
telephone to stop programming.
NOTE:
To review your recorded message,
dial "
45
".
! ! ! IMPORTANT ! ! !
If your Quick Assist II unit fails to operate
correctly, or is programmed incorrectly, put
the unit into default Quick Assist II mode using
the following procedure:
1. Pick up the telephone receiver and listen for the
acknowledge tone.
2. Dial the correct option (A or B as indicated below),
to restore factory defaults; a short beep indicates
successful completion.
A. For RQA-150, dial 978.
B. For RQA-450, dial 979.
3. Dial 814 to put the unit into Quick Assist II mode;
a short beep indicates successful completion.
4. Dial "5110" to complete the setting of Quick
Assist II mode, a short beep indicates successful
completion
5. Program Sections A through F, above.
6. Programming of the Ritron Quick Assist II is
complete!
F. TO PROGRAM THE "ASSISTANCE NEEDED" MESSAGE
REPEAT LIMIT: (DEFAULT SETTING IS 2 TIMES)
1. Look up the code for the desired number of message
repeats on Table 5, below.
2. Pick up the telephone receiver and listen for the
acknowledge tone.
3. Dial "
612
", then the code digit from Table 5.
EXAMPLE
:
If you select 3 times as the message repeat limit,
dial
6123
.
4.
Quick Assist II
responds with a single beep to indicate
it has programmed the message repeat limit.
5. Dial
999
and hang up the telephone to stop
programming.
TABLE 5:
MESSAGE
REPEAT LIMIT
CODE NUMBER
1 time ....................................................... 1
2 times ..................................................... 2
3 times ..................................................... 3
4 times ..................................................... 4
5 times ..................................................... 5
6 times ..................................................... 6
7 times ..................................................... 7
8 times ..................................................... 8
Repeat forever; no limit ............................. 9
DEFAULT
(Programming Instructions continued from page 6)
TABLE 4:
TIME BETWEEN
MESSAGES
CODE NUMBER
No Message ............................................. 0
On Changes Only ..................................... 1
30 seconds .............................................. 2
1 minute ................................................... 3
2 minutes ................................................. 4
5 minutes ................................................. 5
10 minutes ............................................... 6
30 minutes ............................................... 7
1 hour ...................................................... 8
2 hours .................................................... 9
DEFAULT
