Ritron Liberty RLR-460, Руководство пользователя

Страница: 12 / 14

3. The transmitter should automatically key (red LED illuminated). Adjust R328 (REPEAT AUDIO LEVEL) for +/- 1.8
kHz deviation.
Reduce the RF signal generator level to minimum to unkey the transmitter.
RE-ASSEMBLY
1. Disconnect all equipment from the repeater radio assembly.
2. To re-assemble the repeater, slide the radio assembly into the open end of the repeater enclosure.
3. Be sure that the connectors and LEDs line up with the openings at the closed end of the repeater enclosure. Insert
and tighten the six T-10 torx screws into the end plate with the antenna connector as indicated by the white arrows.
4. The re-assembly is complete.