Have questions? Call
800-USA-1-USA
(800-872-1872) or visit our website at
www.ritron.com
How To Assign A Function To A P KEy (Programmable Function Button)
There are 3 Programmable Function Buttons on the
J Series
radio (P1, P2 and P3). See FIG 3 below for their location on the radio. You can
assign each of these buttons or P keys to perform 1 specific function when pressed. The functions you may choose from are listed below:
18
Options
Description of the feature
[
NONE
]
P KEy
will perform no function when pressed.
[
SCAN KEy
]
When
P KEy
pressed, radio will scan
marked
channels. Icon will display when ON. See CH SCAN on page 14.
[
EMERGENC
] When
P KEy
pressed, radio sends Emergency signal to other
radios on same frequency.
[
CALL KEy
]
Press
and hold
the
P KEy
to send a unique Call Tone to let others
know you are about to talk.
[
MONITOR
]
When
P KEy
pressed, radio will monitor traffic on the channel
without tone.
[
TX PWR KEy
] When
P KEy
pressed, will toggle
*
transmit power of selected
channel frequency, between
HI
and
LOW
power. Icon
H
or
L
will
be displayed.
[2T SEND]
2T SEND
can only be assigned to
P3 Key.
When
P3 Key
is
pressed,
the radio sends programmed 2-TONE code for the channel in use.
To Program P KEy’s :
Step 1.
PRESS & HOLD
the MONITOR button and turn radio
ON
.
Radio will sound triple beep, then [
PROGRAM
] will flash
on the display for 3 sec. [
VOX
LEV
] will appear first
on display.
Step 2. Use
buttons to scroll to the PFB you wish to
program: [
P1 KEy
], [
P2 KEy
] or [
P3 KEy
].
Step 3. Press
to see current setting of the specific
P KEy
you have selected.
Step 4. Use
buttons to scroll sub-list setting
options listed above.
Step 5. Press the button to
SAVE
your sub-listing option.
Display will then show the last
P KEy
programmed;
e.g. [
P_ KEy
].
Step 6. To program another [
P_ KEy
] repeat Steps 2 - 5
or...
Step 7. To return to normal operation turn radio
OFF
and
then
ON.
P3
P2
P1
(Orange)
3 Programmable
Function Buttons
FIG. 3
*
NOTE:
Certain frequencies are limited by the FCC to 2 Watt maximum output. See pages 15 &16.
