page 3 RITRON, INC. 1-800-USA-1-USA (1-800-872-1872)
For assistance, call
800-USA-1-USA
(800-872-1872)
or visit our web site at
www.ritron.com
page
4
HOW TO DETERMINE FREQUENCIES & TONE CODES IN YOUR JBS/ PBS/ SBS
NOTES:
1. Ten (10) beeps = 0 (zero).
2. The radio will beep out "44" as a tone code if it has been programmed for "No Tone."
3. A radio that was PC-programmed with any frequency not listed in Table 1, page 5, will sound
meaningless beeps on contents readout.
4. A radio with identical codes in both channels will beep out only one frequency and one QC code.
5. Ritron base station or mobile radios can have a different Quiet Call code programmed into each
channel.
*
The radio pauses to sound a low tone at the end of each beep series.
TO READ OUT (BEEP OUT) RADIO CHANNEL CONTENTS
1. To enter the Programming/ Readout Mode, refer to FIG-3 at left.
2. Press and release the On/ Volume Up button. The radio will begin to sound a series of beeps; each series of
beeps is equal to one digit of each two-digit frequency code or Quiet Call tone code programmed into the radio;
see Tables 1 and 2, on pages 5 and 6.
3. Count the beeps in each series. Record the digits below.
Examples: 2 beeps = 2; 10 beeps = 0 (zero).
NOTES: The radio pauses and sounds a low tone at the end of each series of beeps, separating one digit from the next.
The radio sounds a triple tone when the readout (beep out) process is complete.
CHANNEL 1:
Frequency Code
1st
digit
2nd
digit
CHANNEL 1:
Tone Code
3rd
digit
4th
digit
# of beeps
# of beeps
# of beeps
# of beeps
in series
in series
in series
in series
*
*
*
*
CHANNEL 2:
Frequency Code
5th
digit
6th
digit
CHANNEL 1:
Tone Code
7th
digit
8th
digit
# of beeps
# of beeps
# of beeps
# of beeps
in series
in series
in series
in series
*
*
*
*
FIG-3: TO PLACE THE RADIO IN
PROGRAM/ READOUT MODE
IMPORTANT:
To talk to other users in your group, all radios must
be set to the same frequency and Quiet Call code.
4
CONTINUE HOLDING THE PTT
UNTIL THE BEEPING STOPS,
THEN RELEASE IT
.
The radio will sound a triple tone;
it is now in Program/ Readout Mode
.
1
PRESS AND HOLD until
the “Radio Off” tones are
heard, THEN RELEASE
.
2
PRESS AND
HOLD
.
3
PRESS AND
RELEASE
.
The radio
starts beeping
rapidly
.
