6.5.3
NXDN
The NXDN page programs the settings for NXDN operation for each individual channel.
RX RAN- Sets the value of the RAN Code (0-63) for the receiver.
RX Group ID- Sets the value of the received Group ID(1-65,519).
Squelch Type- Sets the unmute condition of the receiver.
Off- The radio will unmute when it has received a digital signal on the programmed
frequency.
RAN- The radio will unmute when it has received a digital signal on the programmed
fre programmed RX RAN Code.
ID- The radio will unmute when it has received a digital signal on the programmed
fre programmed RX Group ID.
RAN + ID- The radio will unmute when it has received a digital signal on the programmed
fre programmed RX RAN Code + programmed RX Group ID.
TX RAN- Sets the value of the transmitted RAN Code(0-63).
Destination ID- Sets the value of the ID to a specific destination. It can be left blank, set
to 0-65,519, or set to 65,535 AllCall.
Call Type- Sets the transmitter to a specific Call Type.
Off- No specific destination has been selected.
Individual- Sets the radio to transmit to a specific destination as set by the Destination ID.
Group- Sets the radio to transmit to a group of users as set by the Destination ID.
Encryption Key- Sets the Encryption Key Number for when the Encryption feature is enabled.
Can be set to No Key or a value from 1-64.
6.5.4
ENCRYPTION
The Encryption page programs the encrypted 256-bit Key Data for a given Key Number. Click on
a Key Number in the table, and enter the information on the right side of the page.
Key Number- Identifies specific programmed Encrypted Key(1-64).
Key Status- Indicates if specific Key Number is available for use. Set for Active or Inactive.
Key Tag- Numerical label(0-4,294,967,295) for the associated Key Number.
Key Data- 256-bit Encrypted number. Each numerical character ranges from 0-F.
Enter the Key Data- Click to open window to enter the 4X16 Key Data Number for the selected
Key Number.
Zero the Key Data- Click to clear the Key Data for the selected Key Number.
6.5.5
AUDIO
The Audio page programs all settings associated with the Receiver and Transmitter Audio and
their levels.
Analog Mode TX Pre-emphasis- Allows for the signal path from AUDIO IN/MIC IN input to
be either pre-emphasized or flat. Most applications where the AUX IN input is used work best
with a flat response. Factory default is Flat response.
Analog Mode RX De-emphasis- Allows for the signal path from the discriminator to the AUDIO
OUT and SPEAKER output to be either de-emphasized or flat. Most applications where the
AUDIO OUT output is used work best with a flat response. Factory default is for flat response.
Audio Out for Aux & PA(RX) Gain- Receiver Audio Gain adjustment for the high impedance
AUDIO OUT and the low impedance SPEAKER output.
