18
EN
AIR-FLOW SETTING
Set 45 push button 3 to confirm.
Use buttons 6 and 7 to set the air flow.
Push button 3 to confirm.
8.
MAINTENANCE
Warning
•
Disconnect extruder from electrical line before performing any
maintenance intervention.
Let specialized technicians to perform maintenance on the welder.
•
Before any intervention, wait for the complete cooling of the extruder.
COMMUTATOR/BRUSH SEATER CLEANING
Use a brush seater stone to clean the commutator. Repeat procedure at
least once per brush replacement.
AIR FILTER CLEANING
Periodically clean the air grilles with a compressed air gun.
Warning
Do not use corrosive detergents
We recommend to clean the STARGUN LINK after every use.
NUMBER?
45
6
7
3
X 1000: 23/18
▊▊▊▊▊▊▊▊▊
6
7
3
