ritm Voyager 2N, Руководство по эксплуатации

Страница: 94 / 173

www.ritm.ru 94 of 173
Operating Manual. Voyager 2N
EGTS Parameters
This section (Fig. 34) is designed for users, who need to transfer data to
third-party coordinate receipt servers over the EGTS protocol.
i
EGTS is a data transfer protocol used for transmission of data from
vehicles of Category M used for commercial passenger transfer and
vehicles of Category N used for dangerous goods transfer. As per
the order by the Ministry of Transport of the Russian Federation
No. 285 dated July 31, 2012, any data received from vehicles of the
mentioned categories should be re-transmitted to Rostransnadzor
servers and, from 2014 and on, ERA-GLONASS system servers.
The section features the following options:
Identifier of home telematics group
Specify an identifier in the corresponding field.
Allow EGTS statistics transfer
To allow/restrict EGTS statistics transfer, select/deselect the
corresponding field.
Allow unscheduled transferring of alarm events to the EGTS Server
Check this box to increase the priority of sending alarm events to the
server EGTC.
Transfer subrecord EGTS_SR_STATE_DATA
It is used to send information about the status of the subscriber
terminal to the server.
Transfer subrecord EGTS_SR_ACCELL_DATA
It is used to send accelerometer readings to the server.
i
Please clarify any required EGTS parameters with your service
provider.