Page 2 of 4 Page 3 of 4
Screw list:
Description Qty
X1 Wood
Screw
6
Y1
M8 x 40 Screw
4 or 0
Y2
M8 x 16 Screw
4 or 0
Y3
M6 x 35 Screw
4 or 0
Y4
M6 x 12 Screw
4 or 0
Y5
M5 x 30 Screw
4 or 0
Y6
M5 x 12 Screw
4 or 0
Y7
M4 x 30 Screw
4 or 0
Y8
M4 x 12 Screw
4 or 0
Y9
Washer for Wood Screws
(Qty:6) and for M8 screws
(Qty:4)
10 or 6
Y10
Washer for M6 Screw
4 or 0
Y11
Washer for M5, M4 Screw
4 or 0
Y12
Spacer for M6 Screw
4 or 0
Y13
Spacer for M5, M4 Screw
4 or 0
Step 1: Mounting TV interface arm (Part-B) to the back of the TV
a)
If your TV has a flat back surface – No curves and steps
b) if your TV has a uneven or curved back surface, use the supplied spacers
(Y12-Y13) to compensate or adjust the height.
Step 2: Mount the wall plate (Part-A) to the wall
At bottom side of wall plate (Part-A), there are two holes for the security bar. Make sure the
wall plate (Part-A) is mounted in correct direction.
a) Mounting to wood stud
Warning
: Pre-drill the hole for the wood screws. Do not overtighten the lag bolts (Part-X1)
Use a wood stud finder to identify the wood studs, most wood studs are 16 inches apart, may
be 12, 20 or 24 inches in some place. Make sure the wood lag screws (Part-X1) are screwed
into the center of the wood studs.
Use a level to make sure the wall plate is mounted perfectly horizontal.
