8
Publication:
AMEN00393 2020-07-06
8
PUB. NO. VGRDG JANUARY 2015
CONTROL BOX INSTALLATION (OPTIONAL)
VERTIGUARD
™
CONTROL LAYOUT/WIRING INSTRUCTIONS
P/N: 17250107
INCOMING POWER (110 VOLTS)
1. Black to #1 terminal block
2. White to #2 terminal block
G. Green to ground terminal block
LIMIT SWITCH CABLE
7. White wires to #7 terminal block
6. Close limit switch black wire to #6 terminal block for
normally open or normally closed limit switch
or
5. Open limit switch black wire to #5 terminal block for
normally open or normally closed limit switch
A. Pin #1 is 24 volts DC +
B. Pin #8 is 24 volts DC -
Note: (NO) or (NC) is determined by wiring the correct
contacts on the limit switch.
Figure 8.1 - Control Box 5220E001 Rev. C
1
6
5
4
3
2
G
7
A
B
