OPERATION
Extending Barrier
CRANK TO WORM SHAFT
BUSHING BLOCK KEY
CRANK
ENGAGING HANDLE
2
1
A
B
C
D
E Curtain Tube Handle
F Latch Post Assembly
G1 Bottom Hasp
G2 Top Hasp
CRANK TO WORM SHAFT
BUSHING BLOCK KEY
CRANK
ENGAGING HANDLE
2
1
G1
G2
E
F
1 At the basket post assembly:
• Remove the crank (D) from the crank storage clip (A)
•
Place the crank on worm shaft (C) to disengage
worm from worm gear by back threading until free.
•
Lock worm shaft (C) in place by pushing it toward
the unit, the bushing block locking key (B) will
engage and hold it in place
2 Grasp the curtain tube handle (E) and pull curtain
from storage basket by walking across the opening
to latch post assembly (F)
3 To latch the curtain tube handle to the latch post,
place the lower end of the curtain handle in the bottom
hasp (G1) and rotate the top hasp (G2) up and over
the top end of the curtain tube handle Ensure curtain
tube handle is fully engaged in latch post
4
Return to the basket post and engage the worm
to the worm gear by releasing the locking key (B).
5
Re‑thread the worm to the worm shaft (C)
to begin tensioning the curtain
6 Tighten curtain to desired tension
Figure 5
Figure 6
SpanGuard
®
Mesh Safety Barrier
Installation/Service/Owner's Manual
Rite‑Hite
®
6 Publication:
AMEN00136 2019-11-22
