manualshive.com logo in svg

Riso RZ5 Series, Техническое руководство

Поделиться
Скачать
Riso RZ5 Series Скачать руководство пользователя страница 172

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 12:  AF SCANNING SECTION

[ 12 - 10 ]

5. Removing the AF Read Pulse Motor

(1) Switch off the machine power and open the AF unit.

(2) Remover the AF cover and close the AF unit.

(3) Disconnect the AF-PCB connectors CN1 and CN3.  Then remove the ground wire by removing a screw

(M3x6: 1pc).

* Be careful not to drop the lock washer located under the ground wire.

(4) Remove screws (M3x6: 4pcs) and remove the H-upper guide assembly.

(5) Remove screws (M3x6: 2pcs) and remove the AF read pulse motor.

< Precautions on Reassembly >

   - When installing the ground wire, do not forget to install the lock washer under the ground wire.

   - Following the install of H-upper guide assembly, adjust the AF read sensor (rotate the variable resistor VR1

on top of the AF-PCB to adjust LED 1 to the maximum brightness).

AF-PCB

H-upper guide assembly

AF-read pulse motor

Ground wire

AF-read sensor

1310

Содержание RZ5 Series



























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды