Riso rz 510 Скачать руководство пользователя страница 151

Страница: 151 / 178

Troubleshooting

When a Message Displays

149

Wrong-type Master Installed
or Cannot Read Master Info
Replace Master Roll
or Contact dealer/Riso office

Incorrect master is installed.

Set a correct Master Roll.

)

p.129

Important!:

• Use a Master Roll specifically designed

and approved for use with this machine.
Failure to do so may cause problems or
damage to the machine.

The

section on the master

core is missing, or it has worn
off, or it has been tilted.

The

section on the master core

contains information needed for making
masters.
If the machine cannot read the
information, it does not operate. Set a
dedicated Master Roll that has the

mark and is free from wear and tilt.

Wrong-type Print Cylinder
Installed
Replace with Correct Type

Incorrect Print Cylinder (Drum)
is installed.

Install a correct Print Cylinder (Drum).

)

p.135

Important!:

• Use a Print Cylinder (Drum) specifically

designed and approved for use with this
machine. Failure to do so may cause
problems or damage to the machine.

Message

Possible Cause

Action

ORCH_ML_EN.book Page 149 Wednesday, November 10, 2004 7:32 PM

Содержание rz 510



















































































































































































Результаты поиска

Содержание rz 510

Отзывы:

Riso rz 510, Руководство пользователя, Страница: 151 / 178

Результаты поиска

Содержание rz 510

Отзывы: