Riso RN SERIES, Техническое руководство, Страница: 7 / 315

1 – 5
RN (Version 1.0)
CHAPTER 1. MAINTENANCE
WORK PRECAUTIONS
2. Work Precautions
Inspection
If you discover any defects or problems during an inspection, fix the problems or if necessary take
steps such as replacing a part.
Removal
Check the problem area. At the same time, examine the cause of the problem and determine
whether the part needs to be removed or disassembled. Next proceed according to the proce-
dures presented in the Technical Manual. In cases where, for example, it is necessary to disas-
semble areas with large numbers of parts, parts which are similar to each other, or parts which are
the same on the left and right, sort the parts so that you do not mix them up during reassembly.
(1)
Carefully sort the removed parts.
(2) Distinguish between parts which are being replaced and those which will be reused.
(3) When replacing screws, etc., be sure to use the
specified sizes.
Assembly and Installation
Unless specified otherwise, perform the removal proce-
dures in reverse during assembly and installation. In
cases where protrusions or holes are provided to assist
in positioning parts, use them for accurate positioning
and securing.
(Protrusions and holes for positioning parts
Half
pierce section)
Tools
Using tools other than those specified can lead to injury
or damage screws and parts. Have all the tools neces-
sary for the work available.
<Standard Tool list>
Type Tip size Shaft length, etc.
No. 2 (250 mm)
No. 2 (100 mm-150 mm)
No. 2 (stubby type)
No. 1 (75 mm-100 mm)
6 mm (100 mm-150 mm)
3 mm (100 mm-150 mm)
1.8 mm (precision type)
8 mm (100 mm-150 mm)
7 mm (100 mm-150 mm)
2.5 mm
5 mm 5.5 mm 7 mm
8 mm 10 mm 13 mm
Monkey
5.0 mm
4.0 mm
3.0 mm
2.5 mm
2.0 mm
1.5 mm
Phillips screwdriver
Standard screwdriver
Nut driver
(box driver)
High frequency driver
Spanners
(may be double-ended)
Hex wrenches
Type Remarks
Steel scale 150 mm
Feeler gauge
Radial cutting pliers
Pliers
Nipper
Small flashlight
Multimeter
Soldering iron 20 W-30 W
File Flat, round
- ( 2 pieces required )