Riso ME 6350, Руководство пользователя

Страница: 274 / 306

Troubleshooting
When a Message Displays
274
!! Multi-Up is Not Available
with This Paper Size !!
Replace with Proper Paper
of Standard Size (Symptom)
Multi-Up functions cannot be used when
custom-sized papers are set in the
Paper Feed Tray.
(Action)
Load standard size paper in the Paper
Feed Tray.
) p.38
Touch [Close] .
(Alternatively, press the key or the
key to clear.)
!! No Auto Reproduction
Size Selection with This
Combination of Original
and Printing Paper !!
Select Size Manually (Symptom)
With the size of set original and printing
paper, auto reproduction cannot be
performed.
(Action)
Modify the reproduction size.
• When changing the “Size” setting:
Touch [Size Setting] .
• When stopping the print job:
Touch [Cancel] .
(Alternatively, press the key or
the key to clear.)
!! No Auto Reproduction
with This Original
and Printing Paper !!
Select Size Manually (Symptom)
Auto reproduction is not available
because the size of the original could
not be detected.
(Action)
Set the reproduction-size manually.
• When changing the “Size” setting:
Touch [Size Setting] .
• When stopping the print job:
Touch [Cancel] .
(Alternatively, press the key or
the key to clear.)
No Master on
Print Drum (Cylinder)
Make a New Master (Symptom)
You are attempting to print, but there is
no master on the Print Drum (Cylinder).
(Action)
Set the original and create a master.
Touch [Close] .
Set the original and create a master.
Important!:
• Do not leave the Print Drum (Cylinder)
without a master. This dries out the
Print Drum (Cylinder) and causes
damage. You must either create a
master or perform a “Confidential”
operation to wrap a master around the
Print Drum (Cylinder).
Original size exceeds
limitation of layout
Specify the original size (Symptom)
“Layout” is not available for the original
size.
(Action)
Specify the original size.
) p.88
• When changing the “Original Size”
setting:
Touch [Original Size] .
• When resuming the print job:
Touch [Continue] .
(Alternatively, press the key to print.)
• When stopping the print job:
Touch [Cancel] .
(Alternatively, press the key or
the key to clear.)
Message Symptom/Action How to clear a Pop-Up Message