3. Programming
The following sections comprise step by step procedures for configuring the EINE 3A/ A
and EINE 3V/V for individual user requirements. To access the set-up screens press
and hold the “ ” and “ ” Keys Simultaneously.
This will take the User into the Sys Type Screen (in case of 3A/3V) Followed by “Sys” on
Display (Section 3.1) or directly into the CT/PT Primary Screen (in case of A / V respectively) .
3.1 Set Up Screens
3.1.1. System type(for Eine 3V
/
3A)
This screen is used to set the system type. System type “3” for
3 phase 3 wire & “4” for 3 phase 4 wire system.
advances to the system type confirmation menu.
Pressing the “ down” key accepts the present value and
case of 3A) value Edit” menu (see section 3.1.2 for PT
advances to the “PT primary (in case of 3V) or CT primary (in
primary and 3.1.3. for CT primary). Pressing the “ up” key
will enter to the system type selection menu and scroll the values
through will enter values available. Pressing the “ down” key
X
1000
L1
L2
L3
V
X
1000
L1
L2
L3
V
RMS
TRUE
X
1000
V
X
1000
V
RMS
TRUE
C. Display Screens of Eine V/A Models :
X
1000
V
X
1000
A
RMS
TRUE
Note: In Case 3P3W accuracy of I2 is 2% and Sys current is 1%
.
5
