Rishabh RISH CON - I, Руководство по эксплуатации

Страница: 36 / 65

3.2
For programming of transducer, steps to be followed are
Step 1 : DIP Switch setting
DIP Switches should configure for desired Output type as per
given in section 3.3.1
Step 2 : programming
Programming Via Programming port available at
front of Transducers using optional PRKAB60
Adapter
A PC with RS 232 C interface along with the programming
cable PRKAB60 and the configuration software are required
to program the transducer.
( Details of t he programming cable and the software are to
be found in the separate Data sheet: PRKAB 60 Le.)
The connections between “PC PRKAB 60 Transducer.
The power supply must be applied to before it can be
programmed.
The Configuration software is supplied on a CD.
The programming cable PRKAB600 adjusts the signal level
and provides the electrical insulation between the PC and
Transducers.
34
PRKAB 600
Programming
Power supply
Transducer
Programing cable
Software CD
Transducer
connector