User’s Manual
11 of26
2.10 Safe Marking
The laser treatment machine uses the marking as follows. The marking sticks to the upper part of
the machine box and the laser hull
，
Please keep in mind.
Warning
Any inappropriate usage of laser electropult will cause injury to the human body. The
operator should keep alert every moment, and adopt the protection measures necessary.
Safety Procedure
The laser treatment equipment contains some safety devices and all persons who use the
equipment must be familiar with their position and the opera, otherwise the equipments will keep
break. For insuring the safety, press this switch only under th tion method.
Key switch
：
The key switch is used shut off power. This key is only provided by the
manufacturer. Please pull out the key after operation. Please confirm that the system has been
locked.
Emergency button
：
This red mushroom switch can stop the whole machine urgently. When
it is pressed the power supply will cut off. Turn it clockwise to restore power.
Automatic break switch:
The break switch is installed in the left lower part of rear plank.
When the work electric current equipment is over the 6A, this switch will cut power to protect the
system. Pulling up this switch can immediately restore the power supply.
Chapter 3 Installation
The process of installation includes: (Performed by an authorized technician only)
1. Unpacking the device.
2. Staying the device for one day, in order to avoid destruction by high humidity during
