Chapter 7. Setting Guide for each Configuration
7.2.2
Network Settings
After clicking Network Settings among the Set Menus, set values as shown in
and then
click the [Submit] button.
Figure 7-7.
Infrastructure Mode Network Settings
1. Set Device Type to
Device Server.
2. Set Connection Mode to
Static IP.
y
It is recommended to use Static IP, other than DHCP, in setting. Static IP is more convenient for the additional
status inspection and the setting change.
3. Set IP Address, Subnet Mask, Gateway, and DNS as factory default values.
y
For the setting, the user should know the range of IP address assigned in advance.
4. The IP address and the Subnet Mask of Ethernet Configuration are used for the setting of the wired LAN of the
WiComm-1.
y
These items are set only if required.
7-7
Содержание WiComm-1
Страница 1: ...WiComm 1 User s Guide Ver 1 0b 2008 09 09...
