Risco Pro-24, Руководство пользователя

Страница: 21 / 40

Pro-24 User's Manual
21
Zone Bypassing
When an intrusion zone is
not secured
, the keypad's READY LED will not light
nor can the system be readily armed. It may be convenient to have one (or
more) of the zones in your installation
bypassed–
and thus ignored by your
system.
Warning
: A bypassed zone may reduce the system's security capability
.
Bypassing/Unbypassing Zone(s)
STEP DESCRIPTION
1
If the system is not ready, identify the violated zone as follow:
For
LED KP -
the above zone(s) is identified by noting which
zone LED(s) are flashing at the keypad's
ZONES
area.
For
LCD KP –
Enter user code followed by to identify the
violated zone(s), (scroll Up and Down with arrow keys to view all
Not ready zones)
2
To bypass such a zone(s) and cause it to be ignored by the
system:
Enter your [code] and press ( (Bypass LED will be lit)
Note: If you make a mistake when entering your User Code, the
keypad will produce three short beeps. Re-enter if necessary.
3
Enter the two digit zone number from
01
to
24
Repeating the zone number will un-bypass it (toggle action)
An additional zone(s) can be bypassed at the same time by
adding its two-digit number to the sequence.
4
When done, press …
Note: all zones will be automatically un-bypassed when the
panel is armed and then disarmed again.
Bypass LED will turn off when arming in AWAY mode.
Example:
To bypass zones 2 and 13 using code 1234:
Enter-
1-2-3-4 02 13
To un-bypass zone 2 only using code 1234:
Enter – 1-2-3-4 02