8
Key
Function
Off
System is not ready to be armed
Slow Flash
System ready to be armed while Exit/Entry zone is open
On System
Trouble
Off
System is operating normally
On
Tamper in the system
Off
No tamper in the system
On
System connected to cloud
Slow Flash
Cloud connectivity trouble
Off
No cloud connection configured
Proximity Tag Operation
Present the RFID (Proximity Tag) to the keypad as shown in the following illustrations:
Note
: Before using the Proximity Tag, wake up the keypad by pressing any button on the keypad.
SLEEP MODE
For extending the battery life of the keypad, the keypad is designed with a Sleep mode
function. By default, 10 seconds after the last key has been pressed, the keypad will
turn off its display and LEDs. The time can be configured by your installer to a
maximum of 60 seconds.
REPLACING BATTERIES
1.
Remove the fastening screw that secures the mounting bracket to the keypad
(see Figure 1).
2.
Slide the keypad and remove it from the mounting bracket.
3.
Remove the battery compartment cover.
4.
Disconnect the battery cable from the battery connector.
5.
Replace the batteries while paying attention to the polarity of the batteries.
