
Page
14
GARDTEC
872
User Manual
Programming User Codes
(Master code only)
The charts on pages 2 & 35 should be completed by the engineer/user for future
reference of what codes have been allocated on your system.
Under no
circumstances should the actual user code be written down.
If your installation company has given you keyswitches for the operation of your
system the last five user codes may have been reserved for use by these keyswitches.
If your engineer has indicated (see pages 2 & 35) that some
of the user numbers on your system have been reserved
you should not use them whilst programming user codes. If
you do so your system may be adversely affected
1)
With the display showing:-
2)
Enter a Master Code, the display will show:-
3)
Press NO five times, the display will show:-
4)
Press YES, the display will show:-
5)
Enter the user number (1 to 99 ) that you
wish to program followed by YES, the
display will show:-
At this point the display may ask if this code is
for ACE (Keyfob) dependant on the system
settings. Press Yes or No as required if this
question is asked.
< < < < UN-SET > > > >
01 JAN 18 : 58 : 01
Do you want to . .
Set . STUART ?
Do you want to . .
Prog. USER CODES ?
Enter User No. - -
(1- 99) Then YES
Now Enter Code . .
- - - - - - Then YES
PR5407.qxd 05/11/2003 15:12 Page 14