safety InstruCtIons
The lifter may only be connected to alternating
current and must be installed in accordance with
IEC 60364. Installation of the lifter system shall only
be carried out by a certified and trained dealer. The
voltage must correspond with the type plate on the
control box.
Never engage the lifter when persons or animals are
in the spa or in the lifter movement area. Body
parts could be injured. (see Danger Areas illustration)
The operator must use the lifter correctly. He must
consider the local conditions and pay due care
and attention to other persons, in particular children
or animals, who are nearby.
Never engage the lifter when objects or
contamination e.g. heavy snow impairs the spa
cover. The lifter does not replace your obligation to
clean the cover before opening. Contamination can
overload the mechanical system
Always lock the lifter when not in use by removing
the Smart key. (operational lock out) Locking the
system prevents children from drowning when
accessing the spa unattended and protects bathers
from injury or death should the lifter engage
inadvertently.
Depending on the lifter setup the cover will move
beyond the spa´s footprint. Keep visible contact to
all areas surrounding the spa before lifter utilization.
Objects, animals or persons in the cover´s
parking area could get harmed.
Familiarize yourself with the mechanical release
circlip on both lifter arms. Make sure the area below
the cover is free before pulling the circlips.
Removing the clips exposes the spa cover to free
fall.
Be careful when touching dark surfaces in direct
sunlight. Some parts of the lifter can become hot in
direct sunlight.
Never use your spa and/or engage the lifter in the
vicinity of thunderstorms or high voltage cabling.
The lifter is not intended for use by persons with
reduced sensory or mental capabilities.
The lifter must not be operated by children without
parental supervision or persons who have not
been instructed accordingly.
Children must never use the lifter as toy.
Never open the control box - dangerous electrical
voltage inside.
Never leave the lifterer unattended while in
operation.
Do not operate the lifter continuously or outside the
temperature range of -20°C to 50°C.
Do not operate the lifter in strong winds. Gusts
hitting the cover while in movement could be
interpreted as obstacle and shutdown the system.
Keep the spa cover closed in windy conditions.
Heavy gusts can overload the lifter system and open
the safety clutch mechanism. In this case the
cover can free fall in open or closed direction.
Do not expose the opening in the lower carbon
support section (containing the carriage
mechanism) to environmental hazards e.g wet snow,
freezing rain, sand. The carriage mechanism
can fail when impaired by debris.
Do not expose the optional remote control to water.
The remote control is NOT waterproof.
Familiarize yourself with the emergency operation of
the lifter system.
OPTIONAL FOLDAwAY COVER LIFTER
23
