Instructions and Advice for Sinking Riptide
Atlantis 4.6 Exercise Pool
Into Gardens and Decks
If you intend to sink or semi sink your exercise pool please read the following carefully.
When digging your hole, you will need to allow a gap for airflow and tolerance of natural bowing from
water volume when filled.
For
minimum
pit size, please allow 150mm gap on all four sides of your pool, with a further 170mm
extension (770mm total) at the inspection pit end where the components will need to be accessed. In a pit
of this size, rear mounted speakers and water edge lights will not be serviceable and therefore cannot be
installed.
For
optimal
pit size, please allow 600mm gap on all four sides of your pool, with a further 170mm
extension (770mm total) at the inspection pit end where the components will need to be accessed.
Please Note: Any photographic representations of
Riptide Pools
products are for display purposes only, please refer to plan diagrams and
installation instructions for accurate information. Revised Mar-15.
2
