RIPSpeed DV720, Руководство пользователя, Страница: 9 / 18

System Setup Menu System Setup Menu
Selecting a Feature for Adjustment
Press the ( / ) buttons on the remote to select a feature to be adjusted.
Rotate SMART DIAL clockwise/counterclockwise to select a feature to be adjusted. Directly touch
the options on the screen to select a feature to be adjusted.
General setup Menu
Accessing the General Setup Menu
•Select the button on the bottom of the touch screen to access the General setup.
Selecting a Feature for Adjustment
Press the direction buttons on the remote control or touch the option directly on the screen to select
the feature to be adjusted.
Adjusting a Feature
1. Enter the option field for the feature you want to adjust by pressing the (OK) button on the remote
or by pressing the SMART DIAL button. A submenu appears in a second row with the selected option.
2. Select a new value by pressing the direction button.
3. Confirm your selection by pressing (OK) button or pressing the SMART DIAL button. The new
value setup is complete.
Adjusting the Clock
1. Access the “Clock” setting under the General Setup menu.
2. Press the direction button on the remote to move the cursor to the “Hour” or “Min” position, and
press the (OK) button. You also can touch the “Hour” or “Min” position directly.
3. The numeric keypad will pop up.
4. Press the numeric button on the remote control or touch the numeric keypad on the screen to
adjust the hour or minutes.
5. Press the (OK) button on the remote control or on the keypad of the screen to confirm setup.
Return to normal playback
The system will automatically return the previous playback mode that it was in before accessing the
setup menu 20 seconds after the last operation.
Standby
1. Touch the Standby button on the touch-screen to access Standby mode.
2. In the standby mode, the unit stands in low-power state with audio output only.
3. In the standby mode, you can return to normal screen mode by performing any unit operation.
Select the appropriate setting based on the country
in which you reside.
See “Adjusting the clock” to learn how to set the clock.
Clock displays 12 hour time using AM and PM.
Clock displays 24 hour time up to 23:59
The TFT panel automatically opens when the unit
is turned on.
You must press the button on the TFT panel or
the OPEN button on the remote to open the TFT.
The monitor does not open or close when the unit
is turned on or turned off.
The menus are displayed in English only.
12 11