Congratulations on your purchase
of a Ripmax Rock Racer, please read
these instructions carefully and fully before
use and we hope you enjoy your car.
As shown in diagram 1, open the remote control battery cover. Install three ‘AA’ batteries
taking care to note the polarity matched the diagram in each battery slot. Re-install the cover to
secure. Check the transmitter power switch is OFF and that the steering trim is centred vertically
(diagram 2) before proceeding.
As shown in diagram 3, open the car battery bay by unscrewing the retaining screw and
releasing the clip. Insert the battery (checking polarity) and tuck the wire in beside the battery.
Re-install the battery cover and secure with screw.
• Car Scale: 1:24
• Car Battery: 6.4V 320mAh LiFe (Inc.)
• Car Dimensions: 201 x 110 x 74mm
• Driving Max Speed: 25km/h (Approx)
• Driving Time: 15min (Approx)
• Car Charging Time: 60min (Approx)
• Charger Input: 100-240V 50/60Hz
• Charger Output: 6.4V 350mAh
• Tx Max Control Range: 30-40M
• Tx Frequency: 2.4GHz
• Tx Battery: 3 x ‘AA’ 1.5V (Req.)
• Tx Dimensions: 118 x 72 x 179mm
Power
Switch
Power
Switch
Power LED
Steering Trim
Steering Wheel
Trigger
Battery
Charger
6.4v Lithium
Battery
Battery Cover
Battery
Hatch
Battery Installation Guide
Specifications
Parts and Functions
