(5) “Beeeep” (1 long) -
Motor Timing
(6) “Beeeep-Beep” (1 long, 1 short) -
Startup Mode
(7) “Beeeep-Beep-Beep” (1 long, 2 short) -
Governor Mode
(8) “Beeeep-Beep-Beep-Beep” (1 long, 3 short) -
Rotation Direction
(9) “Beeeep-Beep-Beep-Beep-Beep” (1 long, 4 short) -
Reset to Default
3. Now you need to change the setting using the table below. Listen to the beeps, when
you hear the combination of beeps for your chosen setting return the throttle stick to its
high throttle position. You will hear that special tone again. This means your value has been
selected. The ESC will return you to step 2 for more setting changes or simply unplug the
ESC to exit setting mode.
Tones
Items
“Beep”
(1 Short)
“Beep-
Beep”
(2 Short)
“Beep-Beep-
Beep”
(3 Short)
“Beep-Beep-
Beep-
Beep”
(4 Short)
Brake
Off
On
Battery Type
NiMH/NiCd
Li-Ion/NiCd
Cutoff Mode
Soft
Hard
Cutoff Threshold
Low
Medium
High
Motor Timing
Low
Medium
High
Startup
Acceleration
Soft
Normal
Hard
Governor Mode
Off
On
Motor Rotation
Forward
Reverse
Default Setting
Restore
Warranty
We accept no responsibility for the use, installation, application, or maintenance of this
product. No liability shall be assumed nor accepted for any damages, losses, injury or
costs resulting from the use of the product. As far as is legally permitted, the obligation for
compensation is limited to the invoice amount of the product in question.
Company Information
Please contact your place of purchase first in regards to any enquiries/warranty claims.
Address: Ripmax Ltd, 241 Green Street, Enfield, EN37SJ United Kingdom
Website: http://www.ripmax.com
Phone: 020 8282 7500
