46 Nooks Hill Road
Cromwell, CT 06416
Phone: 800-528-8665
Int’l: (01) 860-635-2200
Fax: (01) 860-635-3631
e-mail: [email protected]
Internet: www.ripley-tools.com
Warranty: RIPLEY warrants its products against defective materials and workmanship for a period of one year
from date of shipment from the RIPLEY factory provided the product is utilized in accordance with instructions
and specified ratings.
42363 rev.2
12-01-12 ff
Instructions for WS6-M - Part 2
Step 5.
(Fig. 5) Before stripping the insulation, adjust the
blade edge to 0.39mm (1/64”) – 0.79mm (1/32”) above the
conductor surface by inserting the provided hex wrench
through the hole located beneath the tool blade.
Step 6.
(Fig. 6) Rotate the tool clockwise around the cable to
remove the insulation. Insulation will peel off until the cable
conductor reaches the stop bar. The blade will automatically
sever the insulation cleanly at the end of the cut.
(Fig. 7) To remove the bushing, depress the lock
release pin on the housing and slide the bushing out.
Fig. 5
Fig. 7
TOOL BLADE
1/16” HEX
WRENCH
STRIPPED INSULATION
CURL
LOCK
RELEASE PIN
•
Stop bar removal allows infinite stripping of insulation
•
Rotating stop bar permits a stripping length of 6.19mm (2-
7/16”)
•
WA1 adapter permits the use of the SW2 ratchet wrench
•
WA3-M adapter allows strip lengths up to 139.7mm (5-
1/2”), SW2 can also be used with WA3-M for extra leverage
Model
Part #
Blade Blade Part # Rotating Stop Bar
Part #
WS 6-M
42360
CB 8-2
12903
42361
WS 6 with WA3-M 42355
CB 8-2
12903
42358
Notes
REPLACEMENT PARTS
WA1
Adapter
SW2
Ratchet Wrench
Fig. 6
Fig. 7
WA3-M
Adapter
