Ripley Miller VIS400 Скачать руководство пользователя страница 7

Страница: 7 / 12

Page 7

VIS400 User Guide

Integration with Windows InSpec

InSpec is a free software package from Ripley offering complete inspection, saving, and reporting of

pertinent fiber endface images for fiber optic installations. This software is available for download at

Ripley-tools.com/download.

Connection

To connect the VIS400 to the windows inspec software simply plug the USB cable into the PC while

running the InSpec software. There are no required drivers or additional setup.

Analyzing and saving a fiber with the InSpec Software

Once you connect the VIS400 the “Scope” tab will appear and you will see the screen below with a live

image of the fiber endface. At this point you should use the focusing ring to focus the endface image.

Next make sure you have the correct IEC-Spec is selected. To change your selected IEC-Spec press

“Settings”=>IEC-61300-05-35=> then your given fiber type (such as UPC, APC, MMPC etc). Finally

once the image is focused and the correct spec is chosen press the “Analyze” button to automaticaly

center the image, detect any defects visible and assign a pass fail value to each zone on the fiber, and

color passing defects blue, and failing defects red.

Содержание Miller VIS400












